Setup - Predator 62214 Owner's Manual And Safety Instructions

Set Up
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY:
Operate only with proper spark arrestor installed.
Operation of this equipment may create sparks that can start fires around dry vegetation.
A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations
relating to fire prevention requirements.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING: Turn the Power Switch
of the equipment to its "OFF" position, wait for the engine to cool, and unplug the spark
plug wire(s) before assembling or making any adjustments to the equipment.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagrams near the end of this manual.
Assembly
1. Attach the Handle (5) onto
the Frame (13) with the
Handle Knobs (12).
2. Attach the Spray Gun Holder (3)
to the Handle with a Knob (4).
3. Attach the Hose Hanger (7) to
the Handle with a Knob (4).
4. Attach the two Wand Holders (14)
to the Frame using Bolts (20).
ITEM 62214 For equipment technical questions, please call 1-888-866-5797.
Spray Gun
Holder
Handle Knob
Wand Holder
Figure A
Handle
Hose Hanger
Knob
Frame
Wand Holder
Bolt
Bolt
Page 7