Usb Device; Network Connection - Sony Blu-ray Disc BDP-S485 Operating Instructions Manual

Disc
The disc does not play.
, The disc is dirty or skewed.
, The disc is upside down. Insert the disc with
the playback side facing down.
, The disc has a format that cannot be played
back by this player (page 32).
, The player cannot play a recorded disc that
is not correctly finalised.
, The region code on the BD or DVD does
not match the player.

USB device

The player does not detect a USB device
connected to the player.
, Make sure that the USB device is securely
connected to the USB jack.
, Check if the USB device or a cable is
damaged.
, Check if the USB device is on.
, If the USB device is connected via a USB
hub, connect the USB device directly to the
player.
BRAVIA Internet Video
The picture/sound is poor/certain
programmes display a loss of detail,
especially during fast-motion or dark
scenes.
, Picture/sound quality may be poor
depending on Internet content providers.
, Picture/sound quality may be improved by
changing the connection speed. We
recommend a connection speed of at least
2.5 Mbps for standard definition video
(10 Mbps for high definition video).
, Not all videos will contain sound.
The picture is small.
, Press M to zoom in.

Network connection

The player cannot connect to the network.
, Check the network connection (page 12)
and the network settings (page 27).
The message [A new software version is
available.Please go to the "Setup"
section of the menu and select "Network
update" to perform the update.] appears
on the screen when turning the player on.
, See [Network Update] (page 23) to update
the player to a newer software version.
You cannot start the PARTY STREAMING
function.
, Check that [Party Auto Start] is set to [On]
in [Network Settings] (page 27).
Control for HDMI (BRAVIA Sync)
The [Control for HDMI] function does not
work (BRAVIA Sync).
, Check that [Control for HDMI] is set to
[On] (page 26).
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set [Control for
HDMI] to [Off], then set [Control for
HDMI] to [On] (page 26).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is compatible
with the [Control for HDMI] function.
– the connected component's setting for
the [Control for HDMI] function is
correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the AC power
cord (mains lead), or a power failure
occurs, try the following:
input selector of the AV amplifier
(receiver) so that the picture from the
player appears on the TV screen.
[Control for HDMI] to [Off], then set
[Control for HDMI] to [On] (page 26).
Refer to the instruction manual supplied
with the AV amplifier (receiver).
The System Power-Off function does not
work (BRAVIA Sync).
, Check that [Control for HDMI] and
[HDMI:Linked to TV-off] are set to [On]
(page 26).
Switch the
1
Set
2
29
,continued