Refrigerator Door - GE GTE21 Owner's Manual And Installation Instructions

REVERSING DOOR HANDLES –
5
TRANSFER FREEZER DOOR HANDLE
TO THE RIGHT SIDE OF THE

REFRIGERATOR DOOR

1. Remove the two
screws securing
the bottom end of
the handle with a
Phillips screwdriver
and remove the GE
bacge.
2. For Plastic handles:
Pull handle down
and off of the
fastener on the door.
For Stainless Steel
handeles:
Loosen the set
screw on the
handle with 1/8"
wrench and
remove handle.
3. Remove the fastener from the surface of the freezer
door, and cover the new vacant hole with the
GE Badge. (For a new unit, the GE Badge can be
found in your handle kit. If you need a new badge
call 800.GE.CARES (800.432.2737) (in Canada call
800.561.3344).
Installation Instructions
19
REVERSING DOOR HANDLES –
5
TRANSFER FREEZER DOOR HANDLE
TO THE RIGHT SIDE OF THE
REFRIGERATOR DOOR (CONT.)
4. Remove the plug button from the surface of the right
side of the refrigerator
door and insert the
fastener with
a Phillips screwdriver.
5. For Plasic handle: Attach
handle to fresh food door on
fastener and slide downward
to lock in place with the
screws at the top of the
handle.
For Stainless Steel handle:
Attach handle to fresh food
door with screws at the top
of the handle. Use 1/8" allen
wrench to tighten the set
screw at the bottom of the
handle.
NOTE: Do not over-tighten.