Adjustment Of Throttle Cable; Adjustment Of Carburetor - Kinroad XT50GY User Manual

Adjustment of Throttle Cable

Make sure that the adjusting nut of the throttle
cable and locking nut work normally.
Check to see if the throttle twist grip is with the
required free operating movement.
The required free operating movement:2-6mm.
If the grip can not be so moved freely.turn the
adjusting nut to ensure it.
After adjustment, start the engine and check for
the free operating movenent again,Repeat the
adjustment if necessary until it is as required.

Adjustment of Carburetor

Caution:
The adjusting procedures of idling speed:
1.Support the vehicle by a stand.
2.Adjust the idling speed by the throttle stop
screw(1) to 1500±150rpm.
Caution:
Do not try to cover up any trouble of other parts of
the carburetor by adjusting the idling speed. In case
of any abnormality with the carburetor,it has to
removed by your dealer.
Adjustment of idling speed shall be made only when
the cold engine is warmed up or 10 minutes after the
motorcycle is stopped from driving.
15