Table of Contents
Advertisement
uuReplacing Light BulbsuFog Light Bulbs
Fog Light Bulbs
When replacing, use the following bulbs.
Fog Lights: 35 W (H8 for halogen bulb type)
Inner Fender
Screw
* Not available on all models
246
*
*
1. Turn the steering wheel all the way to the
opposite side from the fog light being
replaced.
Passenger side: Turn the steering wheel
Clip
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the clip and screws, and pull the
inner fender back.
*
1Fog Light Bulbs
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Central Pin
Advertisement
Chapters
Table of Contents
