Turn Signals; Light Switches; Manual Operation - Honda CR-Z 2014 Owner's Manual

uuOperating the Switches Around the Steering WheeluTurn Signals

Turn Signals

Right Turn
Left Turn

Light Switches

■

Manual Operation

High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking, side
marker, tail, and rear license plate
lights
112
The turn signals can be used when the ignition
switch is in ON w .
(
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
1Light Switches
If you remove the key from the ignition switch while
the lights are on, a chime sounds when the driver's
door is opened.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Models with high voltage discharge tube bulbs
Repeatedly turning the headlights on and off reduces
the life of the HID headlight bulbs.
If you sense that the level of the headlights is
abnormal, have your vehicle inspected by a dealer.