Maintenance; Maintenance Chart - Efco MP 3000 Operator's Instruction Manual

Please note that the following maintanance intervals apply for
normal operating conditions only. If your daily work requires
longer than normal or harsh cutting conditions are present the
suggested intervals should be shortened accordingly.
Complete Machine Inspect (Leaks, Cracks, and
Wear)
Clean
Controls (Ignition Switch, Check Operation
Choke Lever, Throttle Trigger)
Fuel Tank Inspect (Leaks, Cracks, and
Wear)
Fuel Filter Inspect and clean
Replace Filter Element
All Accessible Screws and Inspect
Nuts (not Adjusting Screws)
Retighten
Alr Filter Clean
Replace
Starter Rope Inspect (Damage and Wear)
Replace
Carburetor Check Idle
Spark Plug Check Electrode Gap
Replace
Gaskets Inspect and replace if necessary

MAINTENANCE

MAINTENANCE CHART

X X
X
X X
X X
X
X
X
X
X
X X
X
X
en
Every 6
X
Months
X
Every 6
X
Months
X
Every 6
X
Months
15