Aparton SPD-3.1M User Manual

1.1 The SPD-3.1M smoke optical point detector is designed to detect smoky fires indoors, and for
transmission of the alarm signal to fire alarm control panels.
1.2 The SPD-3.1M is counted on the continuous 24-hours operating in connection with fire alarm
& fire-intruder control panels in DC or alternating 2-wire fire alarm loops with
supply voltage.
1.3 The detectors have functions:
- Indication of the standby mode (LED periodical flashing);
- Indication of the alarm mode (LED steady light).
The detector complies with EN 54 – 7:2000/ 1:2002/ 2:2006.
2.1 Supply voltage range, V..................................
2.2 Way of output signal issue .............................. non-contact
2.3 Wiring to control panel...................................
2.4 Standby current consumption, mA.............. .......
2.5 Alarm current consumption, mA.......................
2.6 Internal resistance in alarm mode at 20 mA, Ohm ..
2.7 Reverse current at -30V, A.............................
2.8 Dimensions, mm. .............................. ...........
2.9 Weight, g ...................................................
2.10 Operating temperature range, ° ..........................
2.11 Average lifespan, years. ....................................
3.1 The items supplied with the detector are adduced in Table.
SPD-3.1M
smoke photoelectric detector
Manual
Package
3.2. The K-4 mounting rings can be supplied by a purchase order for installation of the detectors
on suspended ceilings.
SMOKE OPTICAL DETECTOR

2. TECHNICAL SPECIFICATIONS

3. Items supplied with the detector

Name
USER'S
MANUAL
SPD-3.1M

1. PURPOSE

Quantity
up to 25 pcs.
1 pc.
1 pc.
the 12/ 24V rated
10-30
2-wire
0,095
6-30
500
5
Ø100 48
150
from - 10 to + 55
10
Note
B103-02 base including
per a package
per 25 detectors