Technical specifi cations, provided plug does not fi t into your outlet, consult an appearances and other information are subject 4. Configuring the DL16 ..........9 electrician for replacement of the obsolete outlet. to change without notice. All trademarks are the 4.1 Standard Operation ............
In this scenario, 48 bidirectional audio channels at in mind, the DL16 works equally well as a standalone pair for use with analog 24-bit / 48 kHz can be transferred on just one CAT5 line between FOH and stage,...
Page 4
MIDAS DL16 User Manual MIDAS DL16 User Manual DL16 common connections, rear panel DL16 as standalone snake On-stage slave DL16 in Standard mode MIDI footswitch P16-D Active stage monitors Active stage monitors P16-M FOH DL16 in Snake Master mode Audio Interface with ADAT inputs...
OUT 17-24 ADA8200 Note: The signals on both DL16 units (Out 1-8 and 9-16) and both ADA8200 units (Out 17-24 and 25-32) are fully defined on the M32’s ’Routing/AES50 Output’ page. The second DL16’s outputs must be set to Out +8 on the unit itself.
MIDAS DL16 User Manual 4.1 Standard Operation Signals sent from the M32 to the stage are seen the same on all DL16 units in the chain. AES50 channels 1-8 will appear on the XLR OUTPUTS of each unit. The DL16 is in Standard (default) mode when all the configuration STATUS LEDs To achieve maximum output to the stage, the 2nd and 3rd units in the chain...
The DL16 does not necessarily need to be used in conjunction with the Processing M32 console. A pair of DL16 units can be linked to send 16 channels to and from the A/D converters (8-channel, 24-bit @ 44.1 / 48 kHz) 114 dB dynamic range (A-weighted) stage, providing a high-quality digital snake that can work with any analog mixer.
Page 8
M32 DIGITAL CONSOLE MIDAS DL16 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION MIDAS DL16 Responsible Party Name: MUSIC Group Research UK Limited Address: Klark Industrial Park, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. England. Phone Number: +44 1562 741515 DL16...
Need help?
Do you have a question about the DL16 and is the answer not in the manual?
Questions and answers