Temperature And Humidity Trend; Comfort Zone; Heat Index; Talking Clock - Oregon Scientific BAR933HG User Manual

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and
humidity readings.
TREND RISING
TEMPERATURE
HUMIDITY

COMFORT ZONE

The Comfort Zone indicates how comfortable the
climate is, based on current temperature and humidity
measurements.
ZONE TEMPERATURE
Any
WET
COM
20-25°C
(68-77°F)
Any
DRY
NOTE
This information is shown in the Humidity Area
when the current measurement is displayed.

HEAT INDEX

The Heat Index advises 4 levels of warning if the
temperature is high.
DANGER TEMPERATURE
CATEGORY
°C
Extreme danger
>54.5
40.5-54.4
Danger
Extreme Caution 32.2-40.5
Caution 26.6-32.2
To display the Heat Index:
1. Press SELECT to navigate to the Temperature Area.
will show next to the Area.
2. Press MODE to reach the Heat Index display.
3. Press CHANNEL to select the desired channel.
If the temperature is below 26°C / 80°F, or the
NOTE
desired channel is not working, the Heat Index will
display "NA".

TALKING CLOCK

Your clock can keep you informed of the time,
temperature, humidity and weather forecast by the press
of a button or at pre-set times.
NOTE To use any talking function, the AC adaptor must
be connected.
STEADY FALLING
HUMIDITY
>70%
40-70%
<40%
°F
>130
105-130
90-105
80-90

ENABLE / DISABLE TALK FUNCTION

To enable or disable the talk function:
• Plug or unplug the adaptor.
OR
• Press and hold UP and DOWN for 3 seconds.
will appear in the bottom, right-hand corner of the
LCD display when the talk function is enabled.
If you are using the adaptor and want to turn
NOTE
the talk function OFF, then press and hold UP and
DOWN for 3 seconds.

USING THE TALK FUNCTION

To instantly hear the current time, indoor temperature,
humidity and weather forecast, press and hold
SNOOZE / LIGHT for 3 seconds.
To hear the time, temperature, humidity and weather
forecast every hour for a set period of time i.e. 6pm to
10pm, or once every 24 hours:
1. Press SELECT to navigate to the Clock / Alarm Area.
2. Press and hold MODE for 2 seconds.
3. Press MODE to scroll through until you reach the
talk setting, (it appears immediately after display
language).
4. Select 1hr or 24hr broadcast, talk start-time, talk stop-
time and talk volume.
5. Press UP or DOWN to change the setting.
6. Press MODE to confirm.
NOTE If you select the 24-hour talk function, you do
not need to enter a talk stop-time.

TALK VOLUME

The talk function icon appears in the bottom, right-hand
corner of the LCD display.
ICON
See "Using the Talk Function" section for how to adjust
the volume.

MESSAGE DISPLAY

Your clock can display messages and warnings in
5 languages. If a warning is being issued
flash.
To display messages:
Press MESSAGE, the display box text will flash for
5 seconds and then the message will scroll across the
display.
10
VOLUME LEVEL
Low
Medium
High
will