Advertisement
Advertisement
Table of Contents
Related Manuals for Viconics GW2
Summary of Contents for Viconics GW2
- Page 1 Gateway (GW2) Install Guide Guide to Install GW2...
- Page 2 GW2 Install Guide Overview This guide provides instructions for the physical installation of the hardware components for the GW2. Follow the instructions in this manual to ensure a successful and trouble-free installation at the client’s site. Plan and Prepare Read this Entire Guide The information contained in this guide helps the installer work effectively and minimizes the likelihood of any critical issues occurring during installation.
- Page 3 Using screwdriver, connect other wire to GND pin on GW2. Tighten sufficiently. Plug power supply into outlet. Ensure green LED on Ethernet connection port goes on to indicate GW2 is powered. Secure RJ-45 Ethernet cable between GW2 and computer. Refer to commissioning guide to commission GW2 (if not already pre-commissioned).
Need help?
Do you have a question about the GW2 and is the answer not in the manual?
Questions and answers