Hide thumbs Also See for 695GC:

Advertisement

READ OPERATOR'S MANUAL

FUELING THE SAW

50 : 1 (2%)
:
1 gallon : 2.6 oz.
5 liters : 100ml
FUEL CAP

BOX CONTENTS

ICS, Blount Inc. • 4909 SE International Way Portland, OR 97222 USA • Tel 800.321.1240 • Fax 503.653.4393
695GC / 695F4

Quick Start Guide

Read before continuing
WARNING
• Read the operator's manual carefully and understand the contents
before you use this equipment.
• Always wear protective clothing, including hard hat, eye protection,
hearing protection, respiratory protection and gloves.
• See operator's manual for post use clean up and maintenance.
WARNING
CAUTION
FUEL MIXTURE: 50:1 (2 %) gasoline/oil mixture
• Use premium unleaded gasoline with a minimum octane rating of 90.
• Add a small amount of fuel prior to adding oil to container, top off
with fuel for proper fuel/oil mixture, and shake the container.
• Always shut off the saw before fueling. Allow engine to cool off before
fueling.
• Thoroughly mix the fuel in its container before fueling.
• Slowly open the fuel cap to release any pressure that may have built-
up in the tank.
• Always fuel with saw laying on its side.
• After adding fuel, tighten the fuel cap carefully and secure with a
wrench.
© ICS, Blount Inc. • REV 0515 • f/n 545068
icsbestway.com
Always provide adequate ventilation when
handling fuel.
Use caution when handling gasoline.
Failure to use ICS® oil, or other high quality
2-stroke oil, may result in premature engine
failure and/or up to 90% reduction in engine life.
Page 1
(continued on page 2)
Page 1
(continued on page 2)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 695GC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ICS 695GC

  • Page 1: Quick Start Guide

    • After adding fuel, tighten the fuel cap carefully and secure with a FUEL CAP wrench. BOX CONTENTS ICS, Blount Inc. • 4909 SE International Way Portland, OR 97222 USA • Tel 800.321.1240 • Fax 503.653.4393 © ICS, Blount Inc. • REV 0515 • f/n 545068 Page 1 icsbestway.com...
  • Page 2 ICS, Blount Inc. • 4909 SE International Way Portland, OR 97222 USA • Tel 800.321.1240 • Fax 503.653.4393 © ICS, Blount Inc. • REV 0515 • f/n 545068 Page 2 icsbestway.com...
  • Page 3 • Attach to water source with pressure of not less than 20 psi (1.5 bar). ICS, Blount Inc. • 4909 SE International Way Portland, OR 97222 USA • Tel 800.321.1240 • Fax 503.653.4393 © ICS, Blount Inc. • REV 0515 • f/n 545068 Page 3 icsbestway.com...
  • Page 4: Starting The Saw

    • Open the water valve completely. ICS, Blount Inc. • 4909 SE International Way Portland, OR 97222 USA • Tel 800.321.1240 • Fax 503.653.4393 © ICS, Blount Inc. • REV 0515 • f/n 545068 Page 4 icsbestway.com...

This manual is also suitable for:

695f4

Table of Contents