Hydraulic Maintenance - Wesmar HD825 Series Operation And Installation Manual

HYDRAULIC
MAINTENANCE
Monthly checks:
1. Oil Reservoir - Fluid level should be at the
venting plug with the hoist in the 'up' position.
Oil, Chevron automatic transmission fluid,
"Dexron II" or equivalent.
2. Packing gland - Little water should weep from
the packing. It should not drip. If there is too
much water coming from the packing gland
tighten each of the cap bolts one full turn. Run
the hoist up and down and check for water. If the
packing gland cap has bottomed out, add one new
layer of packing, Wesmar part #09.00749.0
3. Check all wiring and hydraulic lines that may
catch or snag when the hoist is moving.
14120 NE 200th Street, Box 7201
Woodinville, WA 98072-4001 USA
T: (425) 481-2296 / F: (425) 486-0909
Email: dsoderberg@wesmar.com
Web: www.wesmar.com
41
WESMAR