SYSTEM COMPONENTS
6.76 in
4.33 in
Console
The HD825 console is where all the adjustments
are made. Its location should be easily reached
when fishing or navigating.
HD825 Console
Computer Control Unit
The computer control unit is designed to fit under
the instrument panel. There are three cables in the
Remote Hand
wheelhouse that connect to the computer control
Control Optional
unit. Consider the length of these cables before
on the HD825
selecting a location to mount the computer control
unit.
Computer
Transmit/Hoist Box
Control Unit
Install close to hoist assembly.
Power Supply Unit
Install close to transmit/hoist box
Monitor
(Customer Supplied)
Specifications:
Power Supply Unit
1. VGA, 640 X 480
2. Horizontal Sync. 31.5 kHz
3. Vertical Sync. 60 Hz
4. Flat Screen or Tube type. Any size.
Transmit/Hoist Box
When selecting a location, keep in mind the
following:
1. Select a location where the monitor is in full
view when fishing.
2. What voltage is available in the wheelhouse to
run the monitor? A converter may be needed to
supply the correct voltage.
3. If there is a chance the monitor might get wet,
23
WESMAR