Table of Contents
Advertisement
Setting Surface Controls
16
Setting the Perfect-Set™
cooktop
The cooktop controls provide 5 digital display
windows to help set power levels for the cooking
zones located on the cooktop. These settings work
the same way as traditional knob settings except
the settings are made using a touch sensitive panel
and show settings using LED style displays.
Available cooktop settings
Your cooktop control provides 15 different power
level settings for each of the 5 cooking or heating
zones (including the warming zone). These displays
have keypads that allow the user to first activate
(ON/OFF) the needed element and then to quickly
turn that element ON using 3 preset power levels
(lo, med or hi). - See Figs. 4 through 6 -
In addition to the automatic settings, the + and -
keypads allows for more precise level adjustments
between the automatic settings.
Element size indicators
Two of the cooktop element positions display
additional red keypads -Fig. 2 - that allows the user
to switch between single or dual elements sizes
quickly whenever the cooking zone is active.
• 1 circle = inner element only
• 2 circles = inner and outer element combined
Hot Surface Alert
After using any of the radiant element positions the
ceramic cooktop will become very hot. Even after
turning the surface controls off, the cooktop will
remain hot for some time after use.
The cooktop control monitors the temperature of
the cooktop surface and displays the message
hot surface when the cooktop is still too hot to
touch -Fig. 1. If the hot surface message remains
displayed, the heating zone may be set again and
used for cooking.
Single
element
keypad
Low
setting
keypad
Fig. 2
active
Fig. 3
set for medium
Fig. 5
• Radiant surface elements may appear to have
cooled after they have been turned off. The
glass surface may still be hot and burns may
occur if the glass surface is touched before it
has cooled sufficiently.
• Do not place plastic items such as salt and
pepper shakers, spoon holders or plastic
wrappings on top of the range when it is in use.
These items could melt or ignite. Potholders,
towels or wooden spoons could catch fire if
placed too close to the surface elements.
Fig. 1
Medium
Double
setting
element
keypad
keypad
on/off
keypad
High
setting
Hot surface
keypad
indicatior
set for low
Fig. 4
set for high
Fig. 6
Advertisement
Table of Contents
