Table of Contents
Advertisement
QUICK START GUIDE
Connecting to the AC power supply
2
Begin by connecting the Pedion to the AC power supply.
This is necessary becuase the Pedion's internal battery is
initially uncharged.
1.
Connect the AC adapter to the DC-IN connector on
the rear of the Pedion.
2.
Connect the power cord to the AC adapter, and plug
the power cord into a nearby AC outlet.
Warning
Use only the AC adapter that comes with your Pedion. Do not
attempt to use an adapter from any other equipment.
Caution
Use only with a 120-240 volt AC power supply.
Place both the computer and the Pedion on a stable surface (e.g.
desktop or floor). If the AC adapter becomes detached from the
system because, for example, the adapter falls off of a desktop, the
power will be cut off, which may cause data loss.
Advertisement
Table of Contents
