Initial Operating Procedures; Ignition Procedure; Operating Mode Selection - Ariston GENUS PREMIUM EVO HP 45 User Manual

初始
"3"
显示屏通过进度条显示如下：
一旦启动程序结束后, 显示屏将显示
供暖和生活热水的设定温度。
需要在USER MENU菜单下设置
日期、时间和语言。
运行模式选择
用模式键９选择需要的模式
运行模式
冬季模式
供暖 + 生活热水 显示设定温度
夏季模式
只有生活热水 显示设定温度
单采暖模式
(无外置储水罐时)
燃烧器点火成功通过蓝色LED 5显示
用户手册
01/01/2000 00:00
40°C
显示屏
24/01/2012 12:00
40°C 70°C
24/01/2012 12:00
40°C
24/01/2012 12:00
70°C

Initial operating procedures

If the boiler is installed inside the apartment, make sure that
all provisions relating to the air inlet and room ventilation (in
compliance with current legislation) are respected.
Check the water pressure on the display regularly and make sure
gure is between 0.6 and1.5 bar when the system is cold.
If the pressure is just under the minimum value the display will
lling procedure.
If the pressure drops very frequently, there may be a water leak at
some point in the system. If this is the case a plumber should be
contacted.

Ignition procedure

Press the ON/OFF button
panel to switch on the boiler.
The display shows the initialisation procedure
- indicated by the bar.
Once the procedure is completed, the display
will visualise the temperatures set for the
central heating and domestic hot water
circuits
70°C
It's also required to set the date, time and
language. Proceed as indicated in paragraph
USER MENU.

Operating mode selection

Use the MODE button 9 to select the desired operating mode.
Operating mode
Winter
heating + hot water production for
domestic use with set temperature
Summer
only hot water production for domestic
use with set temperature
Only Heating
(Exclusion of Indirect Cylinder)
The ignition of the burner will be signalled by the blue LED 5.
user's manual
lling valve..
on the control
.
Display
01/01/2000 00:00
40°C 70°C
24/01/2012 12:00
40°C
24/01/2012 12:00
70°C
15