❹ Selecting A Source; Selecting The Computer Or Video Source - NEC PX803UL-WH User Manual

❹ Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the SOURCE button for 1 second or longer. The projector will
search for the available input source and display it. The input source will
change as follows:
HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMUPTER
→ HDBaseT → SLOT → ...
• Press it briefly to display the [INPUT] screen.
Press the ▼/▲ buttons to match the target input terminal and then
press the ENTER button to switch the input.To delete the menu display
in the [INPUT] screen, press the MENU or EXIT button.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the HDMI, DisplayPort, COMPUTER 2, VIDEO, S-
VIDEO, COMPUTER 1, NETWORK, or SLOT buttons.
• COMPUTER 2 button selects the BNC input terminal.
• VIDEO button selects the BNC (CV) input terminal (Composite Video).
• S-VIDEO button selects the BNC (Y/C) input terminal (S-Video).
2. Projecting an Image (Basic Operation)
20