Table of Contents
Advertisement
2. Video cable
l It is recommended to use a monitor with a resolution at least equal to
that of the camera.
l Connect the Video cable with the CVBS and GND Terminal.
In addition to use the screw terminal you can connect the Adapter cable to
this terminal and then you can connect power by NES Plug and the video
signal by BNC Plug.
+ 12V = +12V DC (±10%)
GND = GND - Power + CVBS Shield
CVBS = CVBS Signal
NC = No Connection
Page : 8
Power– and Signal
Terminal camera
bottom
Advertisement
Table of Contents
