Mitsubishi Electric XL650U User Manual page 25

3. FEATURE menu
opt.
FEATURE
ASPECT AUTO
PASSWORD DISPLAY
FUNCTION INPUT
MENU POSITION 1.
AUTO
CINEMA MODE
?
AUTO
VIDEO SIGNAL
SETUP AUTO
SCART INPUT OFF
A LANGUAGE English
Ë
OK
RESET ALL
ITEM
ASPECT
PASSWORD FUNCTION
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
SETUP
SCART INPUT
LANGUAGE
RESET ALL
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i or 576i signal is being displayed.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren't projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device equipped
with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren't compatible with this projector.
SETTING FUNCTION
AUTO Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)
16:9 This option allows you to select the display position of squeezed (or
horizontally compressed) images stored on DVD discs. By pressing the
ENTER button, you can select the display position among CENTER,
UPPER, and LOWER.
REAL Select to project images in their original size as input.
Use to enable or cancel the password lock. See page 31 for details.
2 options Use to change the position of the menu.
AUTO The fi lm mode will be automatically activated when a fi lm source signal is
input.
OFF The fi lm mode will not be activated.
8 options When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn't displayed
correctly, select the desired video format manually.
AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black thicker.
•
ON / OFF Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN-1 terminal.)
10 languages Use to select the language used in the menus.
OK Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
When 7.5% is chosen, the brightness is decreased by the set-up can-
cel function for the U.S. Choose OFF when the image is dark.
EN-25