Table of Contents
Advertisement
Installation Guide..................................................................
Plug one side of the cable to the Network Adaptor, the other side to the WAN port of
the GATEWAY. Set the PC address to be 192.168.1.2, open IE, and Browse
192.168.1.10
5.1 Installation
1. Using a simple RJ – 45 straight cable types to connect the ATA to a host or
PC.
2. Next try to do a ping test to the following ATA. If the ATA is connected we will
able to get such responses such as below:
3. The default IP address of the WAN Port is 192.168.1.10.Next we will able to
change the IP Address of the LAN accordingly.
4. Click the
of the desired port into the following page.
5. There will be password and login name in the configuration page.
6. Therefore please key in
security purposes.
to open the Internet Explorer browser. Next input the IP address
Username: admin and Password: voip for the
6
Advertisement
Table of Contents
