Table of Contents
Advertisement
6.2.2 WAN Settings
Device operating mode:
1. We can choose either' Router' or 'Bridge' operating mode.
2. You will check either 'Obtain WAN configuration dynamically' or 'Specify fixed
WAN configuration.'
3. 2 optional operating mode: - 'Obtain WAN configuration dynamically', the
information
Configuration – manually set
4. If you choose ' Specify fixed WAN configuration' , you are required to enter
the IP address, subnet mask, IP of the Gateway, and IP of the DNS server, if
applicable.
Multicast limits:
1. Broadcast limit: The value specifies the maximum limit on the percentage of
broadcast packets, which will be bridged to the destination interface (as a
percentage of the source side bandwidth)
2. Multicast limit: The value specifies the maximum limit on the percentage of
multicast packets, which will be bridged to the destination interface (as a
percentage of the source side bandwidth).
is
detected
automatically
through
DHCP
or
Fixed
WAN
10
Advertisement
Table of Contents
