Table of Contents
Advertisement
6.5 CODECS
1. CODECS: Configure the silence suppression to your desired settings.
2. Packetization: Configure the packet sending increments.
3. Jitter buffer: Configure the timing of the voice buffering.
4. Selection between adaptive or fixed jitter buffer. Default=ADAPTIVE
5. Set the adaptive jitter buffer maximum play out delay. Default=100ms.
6. Or fixed jitter buffer play out delay, Default=40ms.
7. Whether or not to automatically switch from an adaptive jitter buffer to a fixed
jitter buffer upon fax/modem tone detection. Click on 'Save CODEC configuration'
to save the configurations made.
21
Advertisement
Table of Contents
