Table of Contents
Advertisement
ASSEMBLY
1.
First remove all contents from the box.
2.
To open the wheelchair, push seat rails and press downwards until the
chair is fully opened taking care to keep fingers clear of moving parts
(Fig. 1).
3.
To close the wheelchair, take the centre of the seat fabric at the front and
back edges and lift (Fig. 2).
Note: The seat rails must be fully engaged in the seat frame support brackets
before sitting down.
Note: When opening and closing your Wheelchair please keep fingers well away
from any possible entrapment areas.
The only part of the Wheelchair that can be adjusted are the leg rests. Ideally your
knees should be at 90 degrees with the seat. If you are not sure please contact a
healthcare professional or your local Wheelchair dealer for advice.
Assembly and Operating Instructions
Fig. 1
Fig. 2
4
Ver. 4 01/14 (2289)
Advertisement
Table of Contents
