Replacing The System Board; Procedure; Post-Requisites - Dell Inspiron 3050 Service Manual

Replacing the system board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
desired changes again after you replace the system board.

Procedure

Place the system board on a clean, flat surface.

Post-requisites

1 Replace the solid-state
2 Replace the coin-cell
3 Replace the wireless
4 Replace the memory
5 Replace the processor
6 Replace the processor
7 Replace the base
computer. After working inside your
drive.
battery.
card.
module.
heat-sink.
fan.
cover.
After working inside your
51