Marshall Amplification HST13 Owner's Manual

OWNER'S MANUAL
MODEL HST13 - VERTICAL TOASTER
MANUFACTURER'S INTRODUCTION
The Marshall High Speed Vertical Toaster produces a grilled
effect on the cut side of sandwich buns. The buns are
inserted at the top of the unit and are pressed against a
heated platen surface, which is covered by a replaceable
toaster platen sheet. The spacing between the heated grill
and the conveyor is adjustable to accommodate different
thicknesses of buns. The buns are discharged onto a product
slide at the bottom of the unit. The system is high speed and
also variable in speed. Additionally, the heat controls are pre-
set at factory, which eliminates unauthorized tampering with
heat settings. The flexibility of this toaster is unmatched
allowing operators to produce the hottest buns in the shortest
time.
135168CH7 RV100599
Copyright © 1999 Marshall Air Systems, Inc.
All Rights Reserved.
Supplier Name: MARSHALL AIR SYSTEMS, INC.
419 Peachtree Drive South
Address:
Charlotte, NC 28217
Serial #:
Date Received:
Date Installed:
Telephone #: 704-525-6230
Toll Free #: 800-722-3474 Customer Service
Fax #: 704-525-6229
Service Referral #: 800-722-3474
Local Service Name:
Local Service #:
Conveyor Speed
Setting:
GENERAL SPECIFICATIONS
Height:
Width:
Depth:
Electrical:
Power Cord:
Weight:
23.250"
19.875"
15.250"
208V Single Phase 18.5 Amps
240V Single Phase 18.5 Amps
6 ft. 3 wire including ground,
with NEMA L6 -20P Plug
(Plug furnished by others on
international units.)
130 lbs.