Table of Contents
Advertisement
To do this...
Auto scan for stations and save
them to preset memory.
Tune to the previous preset
station
Tune to the next preset station. Press
Decrease the volume level
Increase the volume level
Change the speaker mode be-
tween FM, MP3, and AUX.
Using the MP3 Player
Load a memory card that contains MP3 audio files into
the microSD slot [3] of the speaker or load a USB drive
into the USB port [4] of the speaker. Set the Power
switch [1] to the "ON" position, then press and hold
/M [7] to set the speaker mode to MP3.
L
L
Learn which types of memory cards work
with this speaker in the Specifications sec-
tion of this manual.
Page 8
...do this
Press /M.
Press –/
.
/+.
Press and hold –/
.
Press and hold
/+.
Press and hold /M.
When the speaker is in MP3 mode:
To do this...
Start, pause, or resume audio
playback
Skip to the previous track
Skip to the next track
Decrease the volume level
Increase the volume level
Change the active source mode
⚠
L
Do not remove a memory card or USB drive
while the speaker is on. Doing so may dam-
age the speaker system or memory device.
...do this
Press /M.
Press –/
.
Press
/+.
Press and hold –/
.
Press and hold
/+.
Press and hold /M.
Naxa Electronics
Advertisement
Table of Contents
