Using The Fm Radio - Naxa NAS-3074 Instruction Manual

Portable bluetooth
Hide thumbs Also See for NAS-3074:
Table of Contents

Advertisement

To do this...
Change the speaker mode be-
tween FM, MP3, and AUX.
Using the Speakerphone Functions
When the speaker is connected to a cellphone with
Bluetooth
:
®
To do this...
Answer an incoming call or end
the current call.
Call the last dialed number.
Change the speaker mode be-
tween FM, MP3, and AUX.
www.naxa.com
...do this
Press and hold /M.
...do this
Press /M.
Press /M twice quickly.
Press and hold /M.

Using the FM Radio

Connect the included combination cable to the DC5V/
AUX/FM connector [2] of the speaker. Set the Power
switch [1] to the "ON" position and then press and hold
/M [7] to set the speaker mode to FM.
L
L
If a memory card has been loaded, the
speaker will automatically switch to MP3
mode when you set the Power switch to
"ON". Press and hold /M [7] to change the
speaker mode back to FM.
L
L
The combination cable must be connected
for the speaker to receive FM broadcasts.
The first time you use the radio, you should perform an
Auto Scan. Press /M [7] to automatically find and save
all FM stations within reception range.
L
L
You should perform an Auto Scan when you
move to a different location or if the bat-
tery runs down completely.
Page 7

Advertisement

Table of Contents
loading

Table of Contents