Advertisement
If your induction unit appears not to be working properly, it doesn't necessarily mean it's faulty. In all
cases, check the following points.
Malfunction
No indication light when power "on"
Heating indicator does not light, or is
flashing,
Appliance fails to heat up
Appliance suddenly stops heating
during operation
If you fail to identify the problem contact the after-sales service without delay.
22 Sept., 2003
TROUBLE SHOOTING
Check.....
Cable/terminal block is loose
Broken circuit of fuse; or automatic switch in the
power supply
No Power supply
Unsuitable cooking utensil
No pan on the ceramic top
Utensil is not located at the centre of the ceramic
plate
Utensil is smaller than 5cm
Over-heating protection activated
Air entrance or outlet is blocked.
High ambient temperature
Model No. CB-70A
Pg. 7
Advertisement
