Setup
This menu allows the configuration of local camera settings for the unit.
Camera Title
Lens Select
Exposure Time
Collection Res
Auto white balance
Electronic Iris
42
This title can be edited to allocate a name to the unit. This is displayed
when the unit is accessed via NetVu ObserVer and is set when
transmitting information to a Remote Video Response
Centre (RVRC)
Set the camera to support Manual Iris or DC Drive lens. Configure a
selected DC drive lens on the Iris Control page, refer to Camera->Iris
Control.
Exposure time defaults to 1/50 which prevents blurring of the recorded
image. For views containing high speed images, the setting can
be increased (to a max of 1/100 [PAL] or 1/120 [NTSC]). For views
containing static images, the setting can be decreased (to a min of 1)
Setting the Max Collection Resolution limits the unit to record within the
selected maximum resolution. Lowering the resolution settings
will significantly lessen the storage capacity requirements when
using Integrated Camera Recording. Available resolutions range
from CIF to UXGA.
Enables auto tracing white balance.
Allows the camera to provide a electronic iris control if manual lens is
selected.
CamVu 720