Dedicated Micros CamVu 720 Series Installation And Configuration Manual page 34

PowerScript Mgmt
This menu enables installed PowerScripts to be activated/deactivated on start-up. Use the tickbox(es) to
select/deselect installed PowerScripts, then select Save (Green). A system reset will be required for the
changes to take affect.
Note: Changes this page will alter the 'Default.C' file. If you already have a custom PowerScript on your
unit which uses Default.C, please contact Dedicated Micros Technical Support for guidance Tel:
+44 (0) 845 600 9502 for further guidance.
Reset (Red)
Save (Green)
Refresh (Purple)
34
Select to cycle the power to the unit.
Updates the DEFAULT.C file on the NVR to enable selected scripts on
reboot.
Refreshes the information on the current page.
CamVu 720