Sanyo CE21CM1F-C Service Manual page 9

HORIZONTAL ADJUSTMENT
HORIZONTAL CENTRING ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter to the service mode and select mode "IMAGE",
and select item no. 2 "IMAGE 2.P H-P".
3. Press the LEVEL+ or LEVEL - button to adjust the
horizontal centre.
HIGH-VOLTAGE CONFIRMATION
1. Receive circular pattern and set screen mode to
"FULL".
2. Set controls for brightness and contrast to maximum.
3. Connect high-voltage meter to the anode of CRT and
GND.
4. Confirm that voltage is 27.0±1.0kV for 21" model
VERTICAL ADJUSTMENT
VERTICAL CENTRING ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter to the service mode and select mode "IMAGE",
and select item no. 15 "IMAGE1.P VPH".
.3 Press the LEVEL+ or LEVEL - button to adjust the
vertical centre.
VERTICAL HEIGHT ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter to the service mode and select mode "IMAGE",
and select item no. 5 "IMAGE 5.P V-A.
3. Press the LEVEL+ or LEVEL - button to adjust the
vertical height.
OSD POSITIONING ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter to the service mode and select mode "REGU-
LAR", and select item no. 8 "REGULAR 8 OSD". The
OSD test bar will appear on the top of screen.
3. Press the LEVEL+ or LEVEL - button to adjust prop-
er OSD positioning.
-9-
C5KEV