Specifi Cations - Mitsubishi Electric HD4000 User Manual

Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum
resolution
Computer input
Video input
Control terminal/
Others
Operating temperatures
Rated voltage
Power consumption
Dimensions
Weight
Others
Dimension Drawings (unit : mm)
EN-38
DLP™ projector
HD4000
0.65-inch Single chip DMD (Aspect ratio 15:9)
Pixel 1280 x 768 = 983040 pixels
F 2.4 - 2.6 f= 23 - 27.6 mm
250 W
40" min. to 275" max. (Projection distance 1.3 to 10 m)
Computer signal
Maximum resolution : 1280 x 1024 dots (Analog) / compressed
Panel resolution : 1280 x 768 dots
Video signal
NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
Component 480i, 480p, 576i, 576p, 720p, 1080i
signal
Panel resolution : 1280 x 768 dots
[Signal type]
Analog RGB
HDMI
[Signal type]
Video input
S-Video input
Component video input
SERIAL RS-232C (8-pin)
DC 12 V, Max.200 mA (Stereo mini jack)
TRIGGER
+41°F (+5°C) to +95°F (+35°C)
AC100 - 240 V, 50/60 Hz
3.5 A
310 mm (W) x 100 mm (H) x 245 mm (D)
2.9 kg
S-video input
Luminance signal : Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals : Vp-p=0.286 V 75 Ω (burst signal)
Video input Vp-p=1.0 V 75 Ω (negative sync)
Component video
YC
B
input
Vp-p=0.7 V 75 Ω (C
Analog input
RGB : Vp-p=0.7 V 75 Ω (negative sync)
YC C
B
HD/CS : TTL-level (negative or positive polarity)
VD : TTL-level (negative or positive polarity)
Digital input (HDMI) HDMI interface (TMDS single link)
[Terminal type]
D-SUB 15P
HDMI 19P
[Terminal type]
RCA
S
RCA
C : Vp-p=1.0 V 75Ω (Y) (negative sync)
R
, C )
B R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
R
310
[Line]
1
1
[Line]
1
1
1
* Not included protrusion.
, C )
B R
HDMI IN COMPONENT VIDEO IN
S-VIDEO IN
SERIAL USB
VIDEO IN
TRIGGER