Advertisement
X PlusOne Quick Start Guide
Installing Pylons:
1. Connect the pylon wires to the wires in the top of the wing as shown below. Connect two bullet
connectors and single ESC wire. Ensure bullet connector polarity is correct.
Caution: Ensure wire polarity is correct or damage will result. Connect red pylon
2. Insert the pylon spars and slide the pylon onto the wing. As you slide the pylon in place, bundle
the wires into the cavities in the wing and pylon.
3. Insert pylon mounting screws as shown above
4. Install the other pylon onto the bottom of the wing by repeating steps 1 through 3 with the
second pylon
Installing Propellers:
1. Attach the clockwise spinning propellers onto the top and bottom pylon motors and the
counterclockwise spinning propellers onto the wing motors.
2. To install the propellers, slip them onto the motor and add the spinner.
wire to red wing wire and black pylon wire to black wing wire.
Advertisement
