Advertisement
[Example 1]
When setting the AUTO POWER ON to ON. (Figures and symbols enclosed in quotation
marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 41 50 4F 4E 31 0D
'0' '0' 'A' 'P' 'O' 'N' '1' '
The data code of BRIGHTNESS of USER of COLOR TEMP. consists of the R, G and B data.
[Example 2]
When setting the R data to +10, G data to 0, and B data to -5:(Figures and symbols enclosed in
quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D
'0' '0' 'Q' '+' '1' '0' '+' '0' '0' '-' '0' '5' '
[Example 3]
When checking the TINT setting (when the TINT is set to +10). (Figures and symbols enclosed
in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 53 0D
'0' '0' 'S' '
'
• To set TINT at 0, enter +00. (-00 is invalid.)
[Example 4]
When setting the REFERENCE of GAMMA MODE - USER 1 to CINEMA, HIGH to -2, MID to
+3 and LOW to 0. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 47 53 55 31 2B 32 20 30 32 2B 30 33 2B 30 30 OD
'0' '0' 'G' 'S' 'U' '1' '+' '2' '-' '0' '2' '+''0' '3' '+' '0' '0' '
'
30 30 41 50 4F 4E 31 0D
'0' '0' 'A' 'P' 'O' 'N' '1' '
'
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D
'0' '0' 'Q' '+' '1' '0' '+' '0' '0' '-' '0' '5' '
30 30 53 2B 31 30 0D
'0' '0' 'S' '+' '1' '0' '
'
30 30 47 53 55 31 2B 32 20 30 32 2B 30 33 2B 30 30 OD
'0' '0' 'G' 'S' 'U' '1' '+' '2' '-' '0' '2' '+''0' '3' '+' '0' '0' '
Status code from
the projector
'
Status code from
the projector
Status code from
the projector
'
Status code from
the projector
5
Description
Command for setting the
AUTO POWER ON to ON
Command receipt confirmation
(Command echo back)
Description
Command for setting the
picture control
Command receipt confirmation
'
(Command echo back)
Description
Command for checking
the TINT setting
Check result (+10)
Description
Command for setting the
REFERENCE of GAMMA MODE
Command receipt confirmation
'
(Command echo back)
Advertisement
