Care And Operation - Mitsubishi WS - 48313 Owner's Manual

Remote Control Functions: Care and Operation
Operation
Installing the Batteries:
(Figure 2)
1. Remove the remote control's back cover by gently
pressing the ridged tab in the direction of the arrow
and sliding off the cover.
2. Load the batteries, making sure the polarities (+)
and (-) are correct. For ease of installation, install
the negative (-) side first.
For Best Results from the Remote Control:
Be within 20 feet of the equipment.
Do not press two or more buttons at the same time
unless instructed to.
Do not allow to get wet or become heated.
Avoid dropping on hard surfaces.
Do not use harsh chemicals to clean. Use only a
soft, lightly moistened cloth.
Do not mix new and old batteries.
Do not heat, take apart, or throw batteries into fire.
Use only AAA batteries.
Operating the Remote Control:
You can use the remote to control the TV, CABLE/
DBS/DTV, VCR, DVD, and AUDIO products.
Select the product you want to control by moving the
slide switch to the appropriate position. The remote
control has been preset to operate the TV and other
Mitsubishi products. To program the remote control
to operate other products, see Use of the Remote
Control with Other A/V Products, page .
VCR
CABLE/DBS/DTV
TV
2
1
4 5
7 8
0
SQV
INPUT CHANNEL
ENTER
EXCH
ADJUST
CANCEL
V-CHIP
PIP INPUT
FORMAT
PIP/POP
REC STOP
REW/REV PLAY
Figure 1. Remote Control Functions.
Figure 2. Installing the batteries.
The remote control may return to its initial setting
when the batteries are changed. You may need to
reprogram.
DVD
AUDIO
POWER
3
6
9
SLEEP
QV
VIDEO
VOLUME
AUDIO
MUTE
HOME
MENU
INFO
PIP CH
GUIDE
PAUSE
FF/FWD
size AAA
batteries
25