Memory Status; Speed Dial List - Sharp 770SH User Manual

Tip
• If you modify the entry assigned in the group, you
need to re-assign it to the group. Highlight the entry,
press [Options], then select "Re-assign Entry" in
step 2.
• To remove an entry from the group, highlight the
entry, press [Options], then select "Remove Entry"
in step 2.
• To remove a group, highlight a group name and
press [Options] and then select "Delete" in step 1.
Sending a Message Using a Mailing List
→
"Contacts" "Contact Groups"
1.
Highlight the desired group name.
2.
Press [Options] and select "Create Message".
3.
Select the desired type of messaging.
For further procedures, see "Creating a New
Message" on page 55.

Memory Status

This function helps you to check the memory used in
the Contacts List.
→
"Contacts" "Manage Contacts"
Status"
(M 8-9-2)
→
"Memory

Speed Dial List

You can set a maximum of 8 phone numbers in the
Speed Dial list (p. 24).
Setting Contacts List Entries in the Speed Dial
List
→
"Contacts" "Contacts List"
1.
Select the desired entry.
2.
Highlight the desired phone number.
3.
Press [Options] and select "Add to Speed Dial".
4.
Select the desired location.
Tip
• The nine digit keys (G - O) correspond to Speed
Dial list numbers.
To Edit the Speed Dial List
→
"Contacts" "Speed Dial List"
1.
Highlight the entry you wish to edit.
2.
Press [Options] and select "Re-Assign" (or
"Assign").
(M 8-4)
Contacts List 43