Netcommand Specialized Device Keys; Operating Netcommand-Controlled Devices - Mitsubishi Electric WD-60735 Owner's Manual

54
6. NetCommand IR Control (736 and 835 Series TVs)

NetCommand Specialized Device Keys

Refer to this chart when "learning" device keys. "Learn"
some, all, or none of the keys used for each device
type. The chart has space for you to write in functions
you assign to the F1–F4 keys.
Key Name in
Function
Learning Screen
Power On Power On or Power ON/OFF (toggle)
Guide On Screen Program Guide or DVD Disc Menus
Channel Up Next Channel Higher
Channel Dn
Next Channel Lower
Page Up
Page Up in Guides
Page Dn Page Down in Guides
Menu
Setup menu for device
Adjust Up Adjust or arrow up
Adjust Dn Adjust or arrow down
Adjust Lt Adjust or arrow left
Adjust Rt Adjust or arrow right
Enter Enter or Select (menus)
Cancel Cancel or erase (menus)
Play Start playback
Stop Stop playback
Forward Fast Forward
Rewind
Rewind/Fast Reverse
Pause Pause playback
Record Start Recording
1, 2, 3, 4, 5, 6, 7, 8, 9, 0 Digit functions
Enter (digits) Use after digits to directly access channels by
number
- (separator) Add digital channel separator between main channel
number and sub-channel number
Recall (QV) Last Channel Recall
Info On-screen status display or information display
ASSIGN YOUR
F1
CHOICE OF
F2
SPECIALIZED
F3
FUNCTIONS
F4
Power Off Power Off
See the following page for more on keys marked in the
"Special Operation Method" column.
Name on TV See Special
Remote Con- Operation
trol Method Table
POWER
*
GUIDE
*
CH/PAGE
CH/PAGE
CH/PAGE
*
CH/PAGE
*
MENU
*
ENTER
*
—/CANCEL
*
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
ENTER
*
—/CANCEL
*
QV
INFO May require two
keypresses
F1
F2
F3
F4
POWER
6. NetCommand IR Control (736 and 835 Series TVs)

Operating NetCommand-Controlled Devices

Controlling Most Device Types
As an example of NetCommand control, if you are
watching your cable box and you wish to tune to the
next channel higher, press CH/PAGE . NetCommand
then sends the "learned" channel-up control signal to
the cable box.
1.
With an IR emitter properly positioned in front of the
device, use the Inputs > Learn screen to perform
NetCommand setup for the device.
2.
When you wish to use the device, press INPUT to
display the Input Selection menu.
3.
Press to highlight the icon for the device.
4.
Press ENTER to switch the TV to the device.
Note: if you have set up automatic input switching for the
A/V receiver, the A/V receiver will automatically
switch to the correct input for the device.
5.
To operate the device using the TV's remote
control, set the slide switch to the TV position.
6.
Point the remote control at the TV (not the device)
and press the key for the desired function.
Special Operation Methods
Key Name in
Special Operation Description and Setup
Learning Screen
Power On Manual Power On/Off
Use for devices that have only one POWER key.
Power On Automatic Power On/Off
This feature is only for devices that have separate
Power Off
POWER ON and POWER OFF keys on their original remote
controls. If your device does not have a separate
POWER OFF key, do not use the Power Off learn-
ing position; use only the Manual Power ON/OFF
method described above.
In the NetCommand Learn screen:
a. "Learn" the Power On command in the Power
On learning position.
b. "Learn" the Power Off command in the
Power Off learning position.
Menu Displaying the Menu for a Device
Controlling an A/V Receiver
Switching Audio to and from the A/V Receiver
1.
Press AUDIO.
2.
Press to show the Speakers option.
3.
Press to select either AV Receiver or TV.
Controlling A/V Receiver Power
1.
AUDIO.
Press
2.
Press to show the Speakers option.
3.
Press to select AV Receiver.
4.
Point the remote control at the TV (not the A/V
receiver) and press POWER to power the A/V receiver
on or off
Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the
TV's remote operates the volume and mute functions.
Also, when you switch to a device in the Input Selec-
tion menu, the A/V receiver automatically switches to
the correct audio input for the device.
How to Use
1. Press INPUT to display the Input Selection
menu.
2.
Press to highlight the icon for the
device to be powered on or off.
3. With the Input Selection menu still displayed,
press POWER to send the power signal; you may
need to press POWER twice.
Note: If you press POWER without the Input Selec-
tion menu displayed, the TV will turn off.
4. Press ENTER to switch the TV to the device.
• To Power On the Device
1. INPUT to display the Input Selection
Press
menu.
2. Press to highlight the icon for the
device to be powered on or off.
3. Press ENTER to switch the TV to the device
and NetCommand will send the Power On
command to the device.
To Power Off the Device
•
When you turn the TV off, the TV sends all
learned Power Off commands to all devices.
1. While watching a device, press INPUT to display
the Input Selection menu with the device icon
highlighted.
2. Press MENU to send the menu signal to the
device. The Input Selection menu will auto-
matically clear from the screen.
55