Mitsubishi Electric WD-60735 Owner's Manual page 23

44
5. TV Menus
Setup Menu, continued
Clock
Use either the manual or auto method to set the clock.
Set the clock if you wish to:
• Use the TV's Timer function.
• Maintain accurate ChannelView listings.
Setup Menu Options
Settings Manual. To set the clock manually:
1. Select Manual.
Clock
2. Set the time of day.
3. Set the date.
4. Select your time zone.
5. Select either
Note: If using Manual, each time the time change occurs, you must open this
menu and set the TV's clock ahead or back.
Auto. To set the clock automatically:
1. Select Auto.
2. Select your time zone.
3. Select either
4. After exiting the menus, tune the TV to an analog station on
carrying XDS data, typically a PBS station.
Note:
• With the Auto setting, the TV's clock adjusts automatically to daylight savings time.
• The TV's clock will be reset if you tune to a channel sending incorrect time
data. To prevent unwanted clock resets, first use the Auto method to set
the clock from a channel sending the correct time, then change the method
to Manual.
Time
1. With the hour highlighted, press
(Manual AM/PM indicator. Press and hold to change the hour display quickly.
option only) 2. Press ENTER to set the hour.
3. With the minutes highlighted, press
hold to change the minutes display quickly.
Date 1. With the month highlighted, press
2.
(Manual With the day highlighted, press
option only) 3. With the year highlighted, press
Time Zone Eastern, Central,
Mountain,
Pacific, etc.
Daylight Applies
Savings Ignore
Time
Setup menu, Clock options
Applies or Ignore for Daylight Savings Time.
Applies or Ignore for Daylight Savings Time.
ANT 1 or ANT 2
repeatedly to change the hour and the
to change the minutes. Press and
to select. Press ENTER to set.
to select. Press ENTER to set.
to select the current year.
Required for both the Manual and Auto methods.
Required for both the Manual and Auto methods. Select
the option for your area.
Setup Menu, continued
Timer
Use the Timer to set a time for the TV to turn on auto-
matically. Use this menu to set a day, time, input, and
channel for the Timer. If the TV is already on at the
requested time, the TV will automatically tune to the
designated channel.
• The TV clock must be set before you can use the
Timer feature.
• To open the Timer menu, highlight the Timer icon
in the Setup menu and press ENTER.
• The TIMER indicator on the front of the TV flashes
slowly when the TV is off to indicate the TV Timer
has been set to turn on the TV automatically.
• When the Timer turns on the TV, press any key on
the remote control to keep it on. Otherwise, the TV
will turn off after five minutes.
Setup Menu Options
Timer On, Off
Day Daily, Mon-Fri, (every) Sunday, (every) Monday, (every) Tuesday, etc.
Timer
Select the day or days of the week for the Timer to turn on the TV.
Time
To set the time for the TV to come on:
1. With the hour highlighted, press
PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to highlight the minutes.
3.
Press to change the minutes. Press and hold to change the minutes display quickly.
Input Ant-1, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined
and enabled inputs that appear in the Input Selection menu.
Channel If the input is an antenna (ANT 1, ANT 2), enter a channel number in any of three ways:
• Enter the number using the remote control's number keys.
• Press repeatedly
• Press and hold
5. TV Menus
Setup menu, Timer options
repeatedly to change the hour and the AM/
to scroll quickly through the available channel numbers.
45