Remote Control - Mitsubishi Electric WD-60735 Owner's Manual

26
4. TV Operation and Features

Remote Control

1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch
to TV for operation of the TV, and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix C, "Program-
ming the Remote Control."
3. SLEEP: Sets the TV to turn off within 2 hours in incre-
ments of 30 minutes.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers
—
and the CANCEL key to enter digital sub-channel
numbers. Use also for entering letters or names in
menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, * , -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV (QuickView ™ ): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used in this model.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See Setup > Edit > Fav1–Fav6
on page 43.
10. VOL / (Volume Up/Down): Changes sound
level.
11. CH/PAGE / (Channel or Page Up/Down):
Scans up or down through memorized channels.
Pages up and down through screens when used with
ChannelView ™ .
12. FORMAT: Changes the shape and size of the TV
picture.
13. LIST (835 Series): Works like the LIST key for a cable
box or satellite receiver when "learned" for NetCom-
mand or when the remote has been programmed for
the device.
14. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (ANT 1/2) or a connected
device.
15. (Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
2
1
3
4
5
6
7
9
8
12
10
13
14
11
15
16
19
20
17
18
21
22
24 25 26
27 28 29
23
17. GUIDE: Displays or removes ChannelView channel
™
listing for ANT 1 and ANT 2. Displays DVD disc
or top menu for a NetCommand-controlled DVD
player. Displays the guide for a NetCommand-con-
trolled cable box or satellite receiver.
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip ratings information. See
"Status Display," page 29, for details.
19. AUDIO: Selects individual audio settings to adjust.
20. VIDEO: Selects individual video settings to adjust.
Remote Control, continued
21. MENU: Displays the main TV menu. When a sub-
menu is open, backs up one menu level.
22. EXIT: Closes TV on-screen menus/displays.
23. F1–F4
For devices under NetCommand control:
Perform NetCommand "Learning" to assign your
choice of functions to the F1–F4 keys.
For devices operating independently of
NetCommand: The F1–F4 keys work like the A,
B, C, D buttons on some cable boxes, satellite
receivers, and DVD players. Program the remote
control for your equipment and test the keys. See
Appendix C, "Programming the Remote Control."
25. (PAUSE): Freezes a broadcast TV picture from an
antenna source, cable box, or satellite receiver (if
key has not been reassigned for NetCommand use).
Record/Playback Keys
Use any of these methods to enable the recording and
playback commands of the TV's remote control:
• Program the remote control for your DVR, VCR, or
DVD player/recorder and set the slide switch to VCR,
DVD, CABLE/SAT, or AUDIO as appropriate.
• Check HDMI devices for compatibility with the TV's
NetCommand for HDMI feature (see "NetCommand
for HDMI Devices" on the next page).
• 736 and 835 series models only: Perform NetCom-
mand IR "learning" for the device.
24. (RECORD): Records with a VCR or DVR.
25. (PAUSE): Pauses a VCR, DVR, or DVD. See
above for use during TV viewing.
26. (STOP): Stops play of a VCR, DVR, or DVD.
27. (REVERSE): Rewinds a VCR. Reverse scans a
DVR or DVD.
28. (PLAY): Plays a VCR, DVR, or DVD.
29. (FORWARD): Fast forwards a VCR. Forward scans
a DVR or DVD.
4. TV Operation and Features
Note: To operate other audio/video devices using
the TV's remote control:
• See Appendix C, "Programming the Remote
Control."
• For HDMI devices compatible with the TV's Net-
Command for HDMI feature, see "NetCommand
for HDMI Devices" on the next page.
• 736 and 835 series models only: See chapter 6,
"NetCommand IR Control," for NetCommand IR
"Learning" of device keys.
• For use of specific keys with NetCommand-con-
trolled devices, see "Special Operation Methods,"
page 55.
Resetting the Remote Control
If the slide switch is set to TV and the TV does not
respond properly, reset the remote control.
1.
Press and hold POWER for several seconds until the
button blinks twice and goes off.
2.
Release the POWER button.
3.
Press keys 0 0 9 3 5 and the POWER button will blink
twice when you finish entering the code. While
entering the code, pause for a moment between
each key press to ensure it is recognized.
Low-Battery Indicator
If you press a key and the POWER key blinks five times,
replace the remote control's batteries.
Care of the Remote Control
• Use only alkaline batteries.
• Be within 20 feet of the equipment.
• Do not press two or more buttons at the same time
unless instructed to do so.
• Do not allow unit to get wet or become heated.
• Avoid dropping on hard surfaces.
• Do not use harsh chemicals to clean. Use only a
soft, lightly moistened cloth.
• Do not mix old and new batteries.
27