Cleaning The Mop Elements; Maintenance To Be Carried Out By Qualified Service Personnel - Electrolux W575S Operating Manual

Operating manual
26

6.7 Cleaning the mop elements

(Only valid for mop machines).
At regular basis, check the mop elements and clean if necessary.
In the inner drum, there is one or two core covers to the heating elements depending on the size
of the machine. The front cover is located directly above the drain and the other is in front of the
element retainer. Two small screwdrivers are required to remove the core cover.
Use a screwdriver to press down on the retaining plate in the round hole on the core cover.
Place the other screwdriver in the oval hole on the core cover and through the round hole in the
retaining plate.
Push the retaining plate towards the screwdriver which is pressing down on the retaining plate.
⑤
fig.6989A
Remove the core element/elements and clean the elements. If the elements are very dirty, it may be
wise to remove the elements from the drum when cleaning them
The core covers are refitted in reverse order, with the difference that it is not necessary to press on
the retaining plate; you only need to push the retaining plate back into place. When you hear a
clicking sound, the retaining plate is in position.

6.8 Maintenance to be carried out by qualified service personnel

Contact qualified service personnel to perform the following maintenance:
Once a year:
• Inspect the interior of the machine during an actual wash cycle to ensure that no leaks are noticed.