Right Side - HP 255 G4 Maintenance And Service Manual

Right side

Component
(1)
(2)
(3)
(4)
(5)
(6)
(7)
6 Chapter 2 External component identification
Power light
Hard drive light
Memory card reader
USB 2.0 port
Optical drive
Optical drive eject button
Security cable slot
Description
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state, a power-
saving state. The computer shuts off power to the display
and other components.
●
Off: The computer is off or in Hibernation. Hibernation is a
power-saving state that uses the least amount of power.
●
Blinking white: The hard drive is being accessed.
Reads optional memory cards that enable you to store, manage,
share or access information.
To insert a card:
1. Hold the card label-side up, with connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the slot.
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.
Depending on your computer model, reads an optical disc or
reads and writes to an optical disc.
NOTE: For disc compatibility information, go to the Help and
Support web page. Follow the web page instructions to select
your computer model. Select Drivers & Downloads, and then
follow the on-screen instructions.
Releases the disc tray.
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent, but
it may not prevent the computer from being mishandled or
stolen.