Sony KE-42M1 Service Manual page 39

1) Install the Logic Main Board Ass'y onto the Chassis Base as shown in the figure on
the previous page, using the following specified screws.
Board
LOGIC BOARD
2) The securing order is as follows: (1) center of the Logic Main Board Ass'y, (2) right
and left of the Logic Main Board Ass'y, and (3) others.
(The order depends on the alignment of the Chassis Base and the Logic Main Board
Ass'y.)
3) Tighten securely the screws on the Logic Main Board Ass'y using the electric
screwdriver.
Screw
M3 x L10
- 37 -
Number of screws
7