5-3. Removal Procedures
5-3-1. Removing the Logic PCB Ass'y board from the Chassis Base
1) Disconnect the FFC and other cables between the Logic board and the X and Y
boards.
2) Remove the screws from the Logic board using the electric screwdriver, and remove
the board from the Chassis Base.
5-3-2. Removing the Y-Main Ass'y board from the Chassis Base
1) Disconnect the FFC from the Y-Main Ass'y board, and disconnect the connectors
between the Y-Main Ass'y board and the Y-Buffer board.
2) Remove the screws from the Y-Main Ass'y board using the electric screwdriver, and
remove the board from the Chassis Base.
5-3-3. Removing the X-Main Ass'y board from the Chassis Base
1) Disconnect the FFC and the FPC connector from the X-Main Ass'y board.
2) Remove the screws from the X-Main Ass'y board using the electric screwdriver, and
remove the board from the Chassis Base.
No.
P/NAME
6
Y-Drive
7
X-Drive
8
Logic-Main
9
Y-Buffer (UP)
10
Y-Buffer (Lower)
11
Logic-Buffer (E)
12
Logic-Buffer (F)
13
Logic-Buffer (G)
- 32 -