1) Install the X-Main and Y-Main Ass'y boards onto the Chassis Base as shown in the
figure on the previous page, using the following specified screws.
Board
X-MAIN
Y-MAIN
Y-BUFFER
2) The securing order is as follows: (1) center of each Main Board Ass'y, (2) right and left
of the Main Board Ass'y, and (3) others.
(The order depends on the alignment of the Chassis Base and the Main Board Ass'y.)
2) Tighten securely the screws on each Main Board Ass'y using the electric screwdriver.
5-4-4. Installing the Logic PCB Ass'y board on the Chassis Base
LOGI C MAIN
LOGIC MAIN
ASSY BOAR D
ASSY BOARD
Screw
M3 x L10
M3 x L10
M3 x L10
Chas sis Base
Chassis Base
- 36 -
Number of screws
8
7
10
F Type
F Type