Transmitter Set Up; Battery Installation; Controller Functions - LiteHawk XXL II Instruction Manual

Welcome to the World of LiteHawk!
Welcome aboard, this is your new LiteHawk XXL II! Before we get ready for your first
aerial adventure, let's cover the basics together!
Attempting to fly your LiteHawk XXL II without completely reading the manual may
cause injury to yourself and people in the vicinity, as well as damage to the RC model.
Please read the Instruction Manual thoroughly before taking your first flight.
LiteHawk XXL II - Transmitter Set Up

Battery Installation:

1. Open the Battery Cover.
2. If used batteries are present, remove these batteries from the unit by pulling up on
one end of each battery.
3. Install new batteries as shown in the battery compartment (+/-).
4. Replace battery door securely.
5. Check your local laws and regulations for correct recycling and/or battery disposal.
6. Never expose the transmitter or batteries to moisture.
LiteHawk XXL II - Controller Functions
*Familiarize yourself with the Remote and the Helicopter - everything should be turned
off.*
Throttle Control
Power Switch
Power Light
www.litehawk.ca
Left / Right Trim
Directional Control
Forward/Reverse
Left/Right
R