Nokia N97 User Manual page 59

Receive adverts — Receive multimedia message
advertisements (network service).
Receive reports — Display the status of sent messages in
the log (network service).
Deny report sending — Prevent your device from sending
delivery reports of received messages.
Message validity — Select for how long the message centre
resends your message if the first attempt fails (network
service). If the message cannot be sent within this time
period, the message is deleted from the message centre.
The device requires network support to indicate that a sent
message has been received or read. Depending on the
network and other circumstances, this information may not
always be reliable.
E-mail settings
Manage mailboxes
Select Menu Messaging
>
mail.
To select which mailbox you want to use to send and receive
e-mail, select Mailbox in use
To remove a mailbox and its messages from your device,
select Mailboxes, tap the mailbox to be removed if it is not
already highlighted, and select
To create a new mailbox, select
New mailbox. The name you give to the new mailbox
and Options Settings
>
and a mailbox.
Options > Delete.
Mailboxes Options
>
replaces Mailbox in the Messaging main view. You can have
up to six mailboxes.
Select Mailboxes
settings, user settings, retrieval settings, and automatic
retrieval settings.
Connection settings
Select Menu
>
mail > Mailboxes, a mailbox, and
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
User name — Enter your user name given to you by your
service provider.
Password — Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
E-
>
Incoming mail server — Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use — Select an internet access point (IAP).
Mailbox name — Enter a name for the mailbox.
Mailbox type — Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting cannot be changed.
Security — Select the security option used to secure the
connection to the remote mailbox.
>
Port — Define a port for the connection.
and a mailbox to change the connection
Messaging and Options
Connection
Messaging 59
Settings E-
> >
settings.