Turning Off The Power - Dukane 8230W User Manual

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in
orange. Then POWER indicator will stop blinking and light in steady orange
when the lamp cooling is complete (104).
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings, since the projection ray may cause a trouble on
your eyes.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE •Turn the power on/off in right order. Please power on the
projector prior to the connected devices.
• This projector has the function that can make the projector
automatically turn on/off. Please refer to the DIRECT POWER ON
(58) and AUTO POWER OFF (59) items of the OPTION menu.
►A strong light is emitted when the projector's power is on.
Power on/off
21