LG 55eg9600 Instruction Manual page 26

26 MAKING CONNECTIONS
Connecting to a PC
_-_._ NOTE
Use an HDMI connection for the best image quality.
Depending upon the graphics card, DOS mode video may not work ira HDMI to DVl Cable is in use.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If
noise is present, change the PC output to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the PICTURE menu until the picture is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Depending up_n the graphics card_ s_me res__uti_n settings may n_t a___w the image t_ be p_siti_ned _n
the screen properly.
If you are using DVl out from a PC, you have to connect analog audio separately. Refer to the instructions on
the next page.
When using the HDMI/DVl cable, Single link is only supported.
If Ultra HD content is played on your PC, video or audio may become disrupted intermittently depending
upon your PC's performance.
HDMI specifications may be different for each input port, so make sure to check the device
specifications before connecting.
Contact customer service for more information on the HDMI specifications of each input port.
If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer.
However, if the device doesn't support it, it may not work properly. In that case, connect the device to
a different HDMI port or change the TV's ULTRA HD Deep Color setting to Off.
-This feature is available on certain models which are supported ULTRA HD Deep Color only.
(Home) =_ O (Settings) =_ O (Advanced) _ Picture _ HDMI ULTRA HD Deep Color
- On Support 4 K Co_ 60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off Support 4K Ca60 Hz (4:2:0)