LG 55eg9600 Instruction Manual page 22

22 MAKING CONNECTDNS
Connecting to a HD receiver, DVD Player, or VCR
Connect a HD receiver, DVD Player, orVCR to theTV and select an appropriate input mode.
_-@ NOTE
HDMI specifications may be different for each input port, so make sure to check the device
specifications before connecting.
Contact customer service for more information on the HDMI specifications of each input port.
If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer.
However, if the device doesn't support it, it may not work properly. In that case, connect the device to
a different HDMI port or change theTV's ULTRA HD Deep Color setting to Off.
-This feature is available on certain models which are supported ULTRA HD Deep Color only.
(Home) _ O (Settings) _ O (Advanced) =t_ Picture _ HDNtl ULTRA HD Deep Color
- On Support 4 K Ca60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off Support 4 K Ca60 Hz (4:2:0)
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to theTV. Connect the external device
and theTV with the HDMI cable as shown in the following illustration.
@NOTE
* Use the latest High Speed HDMP Cable that supports CEC (Customer Electronics Control) function.
* High Speed HDMP Cables are tested to carry an HD signal up to 1080p and higher.
° H DMI Audio Supported Format: PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
| (_Not Provided)
| _
,m I
I DVD / Blu-Ray / HD Cable Box / HD STB
|
,m|